Crispy Battered Fish and Chips Recipe (2024)

Fish and chips are popular pub fare all around Britain, though I had some of the best in a small seaside town called Hastings, England that my family visited years ago. The crispy golden fried pieces were made using freshly caught fish and were served wrapped in newspaper with thick-cut French fries.

This version of fish and chips is inspired by Dame NYC, an English seafood restaurant in the West Village. Their version of the classic (actually inspired by Heston Blumenthal’s version of fish and chips) has an extra crispy exterior since it’s fried with a combination of all-purpose flour, rice flour, beer and a bit of vodka.

Because both the fish and fries are best fresh and require lots of frying room, I recommend cooking the fries first then reheating them in the broiler or in the air fryer while the fish fries. The batter should be freshly made so it’s frothy and bubbly, I don’t recommend letting it sit ahead of time. It’s also crucial the oil is heated to the proper temperature to get the proper crunch. An infrared thermometer is a great buy to ensure the correct temperature.

Crispy Battered Fish and Chips Recipe

Table of contents

  • Crispy Battered Fish and Chips Recipe
    • Key Ingredients in This Recipe
    • How to Make Fish and Chips
    • Tips and Tricks for This Recipe
    • Other Recipes To Try
Crispy Battered Fish and Chips Recipe (1)

Key Ingredients in This Recipe

  • Fish – A flakey, lean white fish like cod, haddock, halibut or hake has the best texture and flavor for fish and chips. I recommend buying a local fish for the freshest tasting flavor.
  • All purpose flour – This is the most commonly used in beer-batter, using all-purpose flour alone won’t get and stay as crispy as using it in combination with another flour.
  • Rice flour – Which I use in one of my favorite fried recipes, buffalo cauliflower, has a lower moisture content and is also naturally gluten free (however I use it in addition to wheat flour in this recipe).
  • Turmeric – My brother showed me this trick years ago. Adding a bit of turmeric powder adds a beautiful golden color to the batter for perfectly golden looking fried fish in this dish.
  • Vodka – Adding a bit of vodka is the key to a crunchy exterior. Vodka evaporates more quickly than water which makes the crust perfectly crispy.
  • Beer – A simple light beer or lager (it can be cheap) is best for beer batter. You don’t want to use a beer with a flavor that is too overpowering.
  • Potatoes – In this recipe I use Russet potatoes, also known as Idaho potatoes to make the fries served alongside the beer-battered fish. They’re large, starchy, oblong potatoes known for being the ideal baking potato. When cooked they become soft and light on the inside while frying them leaves them extra crispy on the outside.

How to Make Fish and Chips

Crispy Battered Fish and Chips Recipe (2)
Step 1: Prep potatoes.

Slice the peeled potatoes into ½” (1.3cm) thick planks and cut each plank into ½” (1.3cm) fries. Add the cut fries to a large bowl filled with cold water and the vinegar and let sit for 30 minutes.

Step 2: Fry the fries once.

In a heavy-bottomed pot or Dutch oven add enough oil to reach 2” (5cm) up the pan. Heat the oil to 250ºF (130ºC). While the oil heats, drain the fries and pat completely dry. Working in batches, add a handful of the fries to the oil and fry, stirring occasionally, until cooked through, about 5 minutes.

Crispy Battered Fish and Chips Recipe (3)
Crispy Battered Fish and Chips Recipe (4)
Step 3: Increase oil temperature.

Increase the heat. Use tongs to remove the potatoes to a paper towel-lined baking sheet. Repeat with the remaining fries. Let all the fries cool to room temperature then increase the temperature of the oil to 350ºF (180ºC).

Step 4: Fry fries a second time.

Fry for a second time and season. Working in batches again, add fries to the oil and fry until golden brown and crispy, about 3 minutes. Remove to a paper towel-lined baking sheet once more to drain and season with salt.

Crispy Battered Fish and Chips Recipe (5)
Crispy Battered Fish and Chips Recipe (6)
Step 5: Prep the fish.

Cut the fish into filets. Pat dry with paper towels to remove any excess moisture. Season with salt and pepper and set aside.

Step 6: Make beer batter.

Return the oil to heat, adding additional oil to the pan if needed. Heat the oil to 400ºF (200ºC). In a large mixing bowl, whisk together the all-purpose flour, rice flour, baking powder and turmeric. Stir in the vodka followed by the lager into the flour mixture until just combined.

Crispy Battered Fish and Chips Recipe (7)
Crispy Battered Fish and Chips Recipe (8)
Step 7: Coat fish in batter.

Working a few pieces of fish at a time, dip the fish fillets in the batter and turn to coat completely. Remove the fish from the batter one piece at a time, making sure any excess batter drips off.

Step 8: Fry fish.

Add to the hot oil and fry, turning once, until crispy, golden brown and just cooked through, about 3 minutes total. Remove from the oil and let drain on a wire rack set over a paper-towel lined baking sheet. Repeat with the remaining fish.

Crispy Battered Fish and Chips Recipe (9)
Crispy Battered Fish and Chips Recipe (10)
Step 9: Serve.

Divide the fish and fries among serving plates. Serve with a lemon wedges, tartar sauce and malt vinegar.

Tips and Tricks for This Recipe

Swaps and substitutions
  • Try using store bought fries! Rather than making your own fries for the fish and chips, a great shortcut is using store bought, frozen French fries to cut down on the work and frying. Cook them in the oven or use an air fryer for extra crispy fries.
  • Try frying other types of fish using this batter! I actually really enjoy battered, fried salmon.
Troubleshooting Fried Fish
  • My fish isn’t browning. The temperature of the oil you are using to fry the fish isn’t hot enough. Make sure it’s heated thoroughly before adding the fish. Check it by using a thermometer or adding a small amount of batter to the oil, there should be lots of small bubbles. After cooking each batch, give the oil a few minutes to come back to temperature before adding more.
  • My fish isn’t cooked inside but the outside is dark. Your oil is too hot! The batter is browning too fast and the fish doesn’t have enough time to cook while the exterior is browning too fast. The best solution for this is to make sure you have a thermometer on hand.
What to Serve with Fish and Chips
  • Tartar sauce
  • Malt vinegar
  • Lemon wedge
Crispy Battered Fish and Chips Recipe (11)

Other Recipes To Try

If you enjoy this fish and chips recipe, give these recipes a try:

  • Beer Battered Baja Fish Tacos
  • Thai Fried Red Snapper
  • Pan-Seared White Fish

Crispy Battered Fish and Chips Recipe

Crispy Battered Fish and Chips Recipe (12)

PrintPin

Prep Time 30 minutes mins

Cook Time 30 minutes mins

Serves 4

US CustomaryMetric

Ingredients:

For the fries:

  • 4 large Russet potatoes (about 2½ pounds, scrubbed and peeled)
  • ¼ cup white vinegar
  • Vegetable oil, as needed, for frying
  • Kosher salt, as needed

For the battered fish:

  • pound cod or other flakey white fish
  • Kosher salt, as needed
  • Freshly ground black pepper, as needed
  • Vegetable oil, as needed, for frying
  • 1 cup all-purpose flour
  • 1 cup white rice flour
  • 2 teaspoons baking powder
  • ½ teaspoon turmeric
  • ½ cup vodka
  • cup chilled lager beer

For serving:

  • Sliced lemon, for garnish
  • Malt vinegar, as needed
  • Tartar sauce, as needed

Instructions:

For the fries:

  • Slice the peeled potatoes into ½” (1.3cm) thick planks and cut each plank into ½” (1.3cm) fries. Add the cut fries to a large bowl filled with cold water and the vinegar and let sit for 30 minutes.

  • In a heavy-bottomed pot add enough oil to reach 2” (5cm) up the pan. Heat the oil to 250ºF (130ºC). While the oil heats, drain the fries and pat completely dry. Working in batches, add a handful of the fries to the oil and fry, stirring occasionally, until cooked through, about 5 minutes.

  • Increase the heat. Use tongs to remove the potatoes to a paper towel-lined baking sheet. Repeat with the remaining fries. Let all the fries cool to room temperature then increase the temperature of the oil to 350ºF (180ºC).

  • Fry for a second time and season. Working in batches again, add fries to the oil and fry until golden brown and crispy, about 3 minutes. Remove to a paper towel-lined baking sheet once more to drain and season with salt.

For the battered fish:

  • Cut the fish into filets. Pat dry with paper towels to remove any excess moisture. Season with salt and pepper and set aside.

  • Return the oil to heat, adding additional oil to the pan if needed. Heat the oil to 400ºF (200ºC).

  • In a large mixing bowl, whisk together the all-purpose flour, rice flour, baking powder and turmeric. Stir in the vodka followed by the lager until just combined.

  • Working a few pieces of fish at a time, add to the batter and turn to coat completely. Remove the fish from the batter one piece at a time, making sure any excess batter drips off.

  • Add to the hot oil and fry, turning once, until crispy, golden brown and just cooked through, about 3 minutes total. Remove from the oil and let drain on a wire rack set over a paper-towel lined baking sheet. Repeat with the remaining fish.

For serving:

  • Divide the fish and fries among serving plates. Serve with a lemon wedge, tartar sauce and malt vinegar.

DID YOU MAKE THIS?

TAG ME ON INSTAGRAM TO BE FEATURED ON MY STORIES!@cookingwithco*cktailrings

Crispy Battered Fish and Chips Recipe (2024)

FAQs

How do you keep fish batter crispy? ›

Rice flour for a stay-crispy batter. Just using normal flour doesn't cut it – it goes soggy within minutes. We need to use a combination of rice and normal flour. This is a proven technique deployed in many Asian fried recipes, such as Honey Chicken and Sweet & Sour Pork.

How do you make batter stick to fish? ›

There are several ways to make batter stick to fish:
  1. Dry the fish thoroughly: Before battering the fish, make sure it is completely dry. ...
  2. Season the fish: Season the fish with salt and pepper before applying the batter. ...
  3. Use a light coating of flour: Coat the fish lightly with flour before dipping it in the batter.
Mar 30, 2016

Is batter just flour and water? ›

Many batters are made by combining dry flour with liquids such as water, milk, or eggs. Batters can also be made by soaking grains in water and grinding them wet.

How does Gordon Ramsay make batter for fish? ›

Cooking instructions
  1. In a large bowl, mix both flours, baking powder and sugar.
  2. Add soda water, lager and salt.
  3. Mix together only until the batter binds together and is smooth. ...
  4. Cover your fish with a dusting of plain flour, then drop into the batter and coat completely.
  5. Pre-heat vegetable oil in deep fryer to 180C.

What oil makes fish crispy? ›

Thanks to its neutral flavor, affordable price, and high smoke point, canola oil is the most popular oil for frying fish. Peanut, cottonseed, and coconut oil are also great fish frying oils.

Does baking soda make batter crispy? ›

Is baking soda or powder best for frying? A pinch of baking soda can help produce crispy fried foods. It reacts with the acid in the batter to create carbon dioxide bubbles. These lead to an airy batter and a crisper, fluffier result.

Should I coat fish in flour before batter? ›

Don't skip the flour coating since it provides a delicious crispy texture, protects the fish from soaking up too much oil, and also keeps the fillet in one piece.

Why does batter fall off fish when frying? ›

Lastly but not the least important is to dip the batter coated fish in the fryer. The right temp is a must. The range def has to be between 350-375. Lower then that and the batter will disperse, and higher then that the batter might stick but it will look like toast rather then fish.

Do you put egg in batter? ›

Batters are made by combining some sort of flour—usually wheat flour, though cornstarch and rice flour are not uncommon—with a liquid and optional leavening or binding ingredients, like eggs and baking powder.

Should you let fish batter rest? ›

Gradually pour the beer and water into the bowl, stirring with a wooden spoon until you have a smooth, lump-free batter. Leave to rest for 30 mins while you prepare the chips.

What are the 3 types of batters? ›

Culinary professionals break batters into three categories: drop batter, pour batter, and coating batter based on how they use them.

Is batter better with milk or water? ›

Milk: The proteins in milk help the batter adhere to the fish and promote browning. Water: Use very cold water for the crispiest results. Baking powder: Baking powder ensures a light and crispy exterior. Salt: A teaspoon of salt enhances the overall flavor of the fish batter.

Why is my fish batter not crispy? ›

If your fish batter is not crispy enough when cooked try thinning the batter with a little more liquid. Pre-heating the oil to the proper temperature is also very important or the fish will absorb too much of the oil while cooking.

What is fish and chip shop batter made of? ›

On Wikipedia it says that normally water and flour are used, but in some cases, beer and milk substituted. “UK chippies traditionally use a simple water and flour batter, adding a little sodium bicarbonate (baking soda) and a little vinegar to create lightness, as they create bubbles in the batter.

Why put soda water in fish batter? ›

The carbonation will help give the batter an airy texture. Slowly add a bit more club soda and continue to mix. Do this until the batter reaches a nice smooth yet thick consistency. Cut the pieces of fish into palm size pieces or any size you like, dry the fish and add to the batter.

How do you keep batter from getting soggy? ›

Soggy batter prevention that works every time

The key to sog-free batter is surprisingly simple: a light touch when mixing, plus cold water (via What to Cook Today). If you've gotten the dreaded limp fried coating, you might have over-mixed your batter, which forms more pesky gluten that readily soaks up the oil.

Why does my fish batter go soggy? ›

Why is my beer battered fish soggy? the temp of your oil is probably too low, or you're not cooking for long enough. You might want to add a small amount of baking powder to the mix to improve the bubbles in the batter.

How do you keep fried fish crispy for delivery? ›

If you absolutely insist on serving fried fish, the best way to transport it would be in a single layer, in an insulated container, lined underneath with paper towels to absorb some moisture, and with vent holes so that at least some of the steam can escape instead of condensing back on to fish and making the breading ...

How do you keep fish fingers from getting soggy? ›

I find battered fish cold or wet in the middle, but if I defrost the batter is all soggy. Don't defrost the fish pieces. Don't worry about a little frost on the fish. Set your oven temperature at 450°F = 232°C and preheat the oven to that very hot temperature.

Top Articles
Latest Posts
Article information

Author: Manual Maggio

Last Updated:

Views: 6187

Rating: 4.9 / 5 (49 voted)

Reviews: 80% of readers found this page helpful

Author information

Name: Manual Maggio

Birthday: 1998-01-20

Address: 359 Kelvin Stream, Lake Eldonview, MT 33517-1242

Phone: +577037762465

Job: Product Hospitality Supervisor

Hobby: Gardening, Web surfing, Video gaming, Amateur radio, Flag Football, Reading, Table tennis

Introduction: My name is Manual Maggio, I am a thankful, tender, adventurous, delightful, fantastic, proud, graceful person who loves writing and wants to share my knowledge and understanding with you.