Mobile Home Axle | etrailer.com (2024)

Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They attach with U-bolts to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.

• Guides
• Post-Style Guide
• 75 Inch Tall
• CE Smith

Install this hub-and-drum assembly on your trailer. Fits 6,000-lb and 7,000-lb axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, wheel bolts, and lug ...
, races, grease seal, grease cap, wheel bolts, and lug nuts are included Hub and drum are made in the USA Specs: Application: 6,000-lb to 7,000-lb trailer axles Drum dimensions: 12" diameter x 2"

• Hub with Integrated Drum
• Standard
• For 6000 lbs Axles
• For 7000 lbs Axles
• 25580
• 5 Spoke Utility
• 15123
• Dexter

This Dutton-Lainson industrial winch is designed for heavy-duty vertical lifting operations. Crank handle clockwise to lift the load, counter-clockwise to lower the load. Automatic brake stops the load when hand cranking stops.

• Brake Hand Winch
• Utility Winch
• Standard Hand Crank
• Single Speed Winch
• Heavy Duty
• Wire Rope
• Dutton-Lainson

Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 5,200-lb and 6,000-lb axles. Inner bearing (25580) and race, outer bearing (15123) and race ...
lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 5,200-lb and 6,000-lb axles with #42 spindles Compatible with standard axles from most

• Hub with Integrated Drum
• Pre-Greased
• Standard
• For 6000 lbs Axles
• For 5200 lbs Axles
• 25580
• 6 on 5-1/2 Inch
• 15123
• 16-1/2 Inch Wheel
• 16 Inch Wheel
• 14-1/2 Inch Wheel
• 15 Inch Wheel
• etrailer

This Dutton-Lainson industrial winch is designed for heavy-duty vertical lifting operations. Crank handle clockwise to lift the load, counter-clockwise to lower the load. Features automatic brake.

• Brake Hand Winch
• Utility Winch
• Standard Hand Crank
• Single Speed Winch
• Heavy Duty
• Polyester Strap
• Wire Rope
• Dutton-Lainson

Hub is designed for use on trailer idler axles. Fits 7,000-lb axles with #42 spindles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub assembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Sturdy iron construction Zinc-enriched paint finish QAI and CSA certified Specs

• Hub
• Standard
• For 7000 lbs Axles
• 25580
• 8 on 6-1/2 Inch
• 14125A
• 16 Inch Wheel
• 17 Inch Wheel
• 16-1/2 Inch Wheel
• 17-1/2 Inch Wheel
• etrailer

Towing starter kit includes 7-1/2" long, powder coated ball mount; 2" diameter, chrome-plated, pre-torqued hitch ball; and pin and clip. Slides into 2" square trailer hitches.

• Fixed Ball Mount
• 2 Inch Ball
• One Ball
• Drop - 2 Inch
• Rise - 1 Inch
• Steel Ball
• Class III
• 7500 lbs GTW
• Steel Shank - Gloss Black
• CURT

Trailer axle measures 86-1/2" from hub-face-to-hub-face and 71-1/2" from spring-center-to-spring-center. Includes electric brake assemblies, hubs, drums, bearings, races, seals ...
Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend

• Leaf Spring Suspension
• Easy Lube Spindles
• 6 on 5-1/2 Inch
• Electric Brakes
• 86-1/2 Inch Long
• 6000 lbs
• No Drop or Lift
• etrailer

Straight-tongue coupler bolts onto your 2-1/2" wide trailer tongue. Pull trigger and pull up on the latch to open the ball socket. The durable zinc offers superior rust resistance, making it perfect for boat trailers and similar applications.

• Standard Coupler
• 1-7/8 Inch Ball Coupler
• 2-1/2 Inch Channel
• Bolt-On
• 2000 lbs GTW
• etrailer

Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race ...
on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun

• Hub with Integrated Drum
• Easy Grease
• EZ Lube
• Pre-Greased
• For 3500 lbs Axles
• L68149
• 5 on 4-1/2 Inch
• L44649
• 13 Inch Wheel
• 14-1/2 Inch Wheel
• 14 Inch Wheel
• 15 Inch Wheel
• etrailer

This system uses stainless steel cables with sturdy springs to make it easy for you to raise and lower the tailgate on your open utility trailer. Units mount on both sides of the trailer to assist each side of the tailgate evenly, preventing warping.

• Trailer Tailgate
• Tailgate Assist
• Manual
• Yellow
• Gorilla-Lift

Trailer axle measures 89" from hub-face-to-hub-face and 74" from spring-center-to-spring-center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting ...
Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend

• Leaf Spring Suspension
• Easy Lube Spindles
• 6 on 5-1/2 Inch
• Electric Brakes
• 89 Inch Long
• 6000 lbs
• No Drop or Lift
• etrailer

Simple, push-to-test button lets you check the charge on the battery in this breakaway kit. Complete kit brings your trailer to a safe stop if it separates from your vehicle. Built-in charger automatically charges battery while trailer is connected. on box Kit includes breakaway switch, 1-amp charger, 5-amp-hour battery, battery box, wiring, and wire loom Specs: Application: single-axle or tandem-axle trailers with electric braking systems Breakaway

• Kit with Charger
• Side Load
• 1 Amp Charger
• Single-axle
• Tandem-axle
• 5 Ah
• LED Tester
• Bright Way

Radial tire has a ply rating of 10 and a 2,830-lb maximum load at 80 psi. The 15" diameter x 6" wide steel trailer wheel features a 6 on 5-1/2 bolt pattern and a corrosion-resistant powder coat finish.

• Tire with Wheel
• Radial Tire
• 15 Inch
• Load Range E
• 6 on 5-1/2 Inch
• 225/75-15
• Steel Wheels - Powder Coat
• Kenda

Bluetooth-enabled brake controller lets you monitor and control your towing directly from your phone. Create multiple trailer profiles and tweak your settings in the app. One step, plug-and-play installation into your 7-way. (C54VV - sold separately) monitors your tire pressure and temperature Assembled in the USA Specs: Application: trailers with up to 2 axles (4 brake assemblies) Compatible with electric

• Proportional Controller
• Hidden
• Smartphone Display
• CURT

1 seal I.D. O.D. Use With: 1.938 2.510 MHU Axles

• Seals
• Grease Seals - Single Lip
• 1.938 Inch I.D.
• 2.510 Inch O.D.
• Redline

Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system.

• Trailer Hitch Wiring
• Powered Converter
• 4 Flat
• Custom Fit
• Hopkins

Hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included ...
axles with BTR spindles Compatible with standard axles from most manufacturers, including AxleTek, Dexter, Lippert (LCI), and AL-KO Wheel size: 13" to 15" Bolt pattern: 5 on 4-1/2" Wheel

• Hub
• Standard
• Pre-Greased
• For 2000 lbs Axles
• L44649
• 5 on 4-1/2 Inch
• L44649
• 13 Inch Wheel
• 14 Inch Wheel
• 15 Inch Wheel
• 14-1/2 Inch Wheel
• etrailer

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.

• Custom Fit Hitch
• Class III
• 8000 lbs WD GTW
• 900 lbs TW
• 900 lbs WD TW
• 6000 lbs GTW
• Visible Cross Tube
• etrailer

The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12" x 2" Assemblies have rust-resistant, e-coated backing plates to protect from debris. Fits 14.5" to 16.5" wheels. Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15", 16", and 16-1/2" Axle rating: 5,200 lbs, 6,000 lbs, and 7,000 lbs Limited 1-year

• Electric Drum Brakes
• Standard Grade
• 12 x 2 Inch Drum
• Self Adjust
• 5200 lbs Axle
• 7000 lbs Axle
• 6000 lbs Axle
• 14-1/2 Inch Wheel
• 15 Inch Wheel
• 16 Inch Wheel
• etrailer

• Trailer Hitch Wiring
• No Converter
• 7 Round - Blade
• 4 Flat
• Custom Fit
• Hopkins

... . Designed primarily for RVs and mobile homes. separately) Transfers load and sudden impacts from one axle to another by permitting movement between the axles Distributes weight evenly Results in smooth ride for trailer Used primarily in RV and mobile-home

• Standard Equalizer
• Camper
• Car Hauler
• Utility Trailer
• Double Eye Springs
• 6-1/16 Inch Long
• Tandem Axle
• Triple Axle
• TruRyde

Install a 4-way flat on your vehicle with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.

• Trailer Hitch Wiring
• Converter
• 4 Flat
• Universal Fit
• CURT

9" Wide x 66" long x 19-3/4" tall. These sturdy teardrop fenders each have a flat back to mount flush with your trailer. 16-Gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.Features: Rounded teardrop fenders cover 2 tires on each side of your tandem-axle trailer Blocks road debris from hitting other vehicles and helps protect your trailer's cargo Flat mounting

• No Step
• 14 Inch Wheels
• 15 Inch Wheels
• Steel
• 9 Inch Wide
• For Tandem-Axle Trailers
• 66 Inch Long
• etrailer